What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 21.06.2025 00:26

First Sentence:
This device then solves the entire problem.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Why do people with trauma easily recognize other people with trauma through eye contact?
what exactly is a ‘surge’ protector?
2024–10–10[John johnson John Johnson ]
The third is lightning and “how it gets conducted into a home.”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is where this question deviates from being a 'generic' question, and becomes more specific.
It also is a device that limits the change in current flow.
The MOV will conduct when the voltage exceeds 50% of line voltage.
so, what happens?
Has anyone ever really waited that long and gotten a paper check mailed 20 days ago?
but I think this circuit , shows a few more pieces.
What is lightning?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Why do almost all vertebrates have tails, but not apes and frogs?
One
He then describes the function of a fuse.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Are there any penalties for bestiality in the USA and laws prohibiting it?
(Dc diagram shown, AC is similar).
Edit 2024–10.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Upvotes:
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is where the MOV conducts again, and dissipated the energy.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
A fuse is a non-resetable over current circuit protector.
For this case there are devices called Metal oxide varistors (MOV).
What are some questions obviously just asked for sexual gratification?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Can the fuse protect the electronic devices from lightning instead of a surge protector.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
eight
These devices are installed between the “hot” and “neutral” and protective ground.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
One is “what exactly is in a ‘surge protector’ ? ”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Barnstars:
The other is “what does a “fuse” do?”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
In schematic diagrams this is the symbol for a fuse:
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
There are three different concepts here that are getting confused.
I post the exact comment here.
[old diagram got deleted by accident]
There are two important concepts here.
the problem then depends on "how fast does the fuse operate?".
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
What does a fuse do?
A circuit breaker is similar, but is resettable.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
But… the neutral is now “floating” because of the 1 ohm resistance.
He then describes Rainy Season and Lightning.
This one hit behind the barn.
It seems Mohan does not understand the difference between a comment and an Answer.
An AC voltage/ current source, and an ac inductive load.
At least they know the answer if they wanted it.
This is 'the assistant's answer'
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
a photo is worth a thousand words.
[image of Common-mode choke]
But it can get overloaded, and no longer works.
2024–10–14 [Omar Gharbi Omar Gharbi ]
He then asserts :
Because the load is inductive, the current lags the voltage.(by a bit).
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–16 [ OO OLAOYE OYEBODE ]
Now when you have a certain ac resistance, then a current flows in a loop.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
So, the voltage could go up to 500 volts, and the fuse will not open up.
but this device (an Inductor) … impedes the rapid changes in the current.
nine
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Here is a simplified AC power diagram.
The bolt then partially travels down the line to your home.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.